ShIP to
Item Generation | 10G | |
Single Beam Models | H1 H3 H7 H8 H9 H10 H11 H15 H16 9005 9006 9012 P13W/PSX26 5202/PSX24 | |
Hi Lo Beam Models | H4HILO H13HILO 9004HILO 9007HILO | |
LED Chip Type | 2 * 18W(Single beam);4*18W(Hi Lo Beam) H15 30W+DRL 10W | |
Voltage | DC 8-32V (V-start: 6V) (H13,9004,9007,H15 9-32V) | |
Current | 1.299A-DC13.5V, | |
Operating Power | 17.5365W | |
Lumen | 3600LM | |
Color Temp | 5700K | |
Working Temp | -45°C~+85 °C | |
Chip working temp | -40°C~+120 °C | |
Protection Function | Reverse polarity protection | |
Life Span | >10000 hours | |
Remarks | Anti-EMI(anti-electromagnetic interference): S95/54/EC |
Same size of luminous focus as standard halogen bulbs
Standard light beam pattern, type of anti-glare
Standard light cutting line and high brightness
Perfect light beam pattern, no glare;
Form effective lighting upgrade 200%;
Plug and play, non-destructive & fast installation;
Small body, it can fit all cars
CANBUS no error for 99% of new cars
It can use in 12V and 24V
Practical and patented technology;
Long life and less defetive rate
360 degree adjust
Installation
1.360° Beam Angel Adjusttable:There are some cars need to adjust the beam angle for providing better lighting pattern, Unique adapter ring can provide 360°adjuatable angle.
2.Lighting Beam adjust steps:Some cars need to adjust the beam angle for providing better lighting pattern, please follow the below steps to adjust the rotating ring.
◆ Step-1:If the stop of the existing halogen lamps is vertically up and down, it is no need to adjust. Otherwire, please follow the below steps to adjust the installation angle of rotating.
◆ Step-2:Use the allen key to loosen the screws of the rotating ring and then install the led bulb.
◆ Step-3:Trun bulb body until the LED burner is aligned vertically in the reflector, and shining to the left and right sides of the refector. Check the angle on rotating ring from the front, take out the scews on rotating right.
◆ Step-4:Install the LED bulb again for final check, the low beam should finally shine with the clear bright-dark cut-off line. This is meant to reduce glare lighting to other drivers.
Copyright © 2019 CNLM LIGHTING Co., Ltd. | All Rights Reserved
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist
Product Message